MT-5 2,4GHZ FHSS 5 Radio Transmitter and Rx-493i New Generation Receiver
10% discounted
Brand | SANWA |
---|---|
Product Number | 101A32671A |
Stock | 8 |
Only FH5 RF mode compatible
- FH5 RF mode is higher resolution than the former FH4 RF mode.
- Also, MT-5 installed SUR (SANWA ULTRA RESPONSE) Mode
- which is a faster mode than SSR (SANWA SUPER RESPONSE) mode
- which was installed in MT-44.
- Combination with FH5 RF mode and SUR mode will give the great smooth feeling.
Compatible receivers are RX-491, RX492, RX-493, and RX-493i.
(FH3 and FH4 compatible receivers as RX-38*, 45*, 46*, 47*, and 48* cannot be used for MT-5)
Indicator Function compatible
- Indicator function can be checked signal strength connected transmitter.
- Using a transmitter which installed Indicator function can be used for finding problems
- As incorrect receiver placing and finding the best receiver position for the transmitter.
- By SANWA technical development, indicator function can be checked signal strength without any effect with a response.
High-Resolution Display
- The same detailed dot as MT-44 enables so clear display.
- Three kinds of telemetry data can be displayed simultaneously because of the grayscale display.
Best Position For Steering/Throttle
- Steering/Throttle is arranged in the best position for operation.
- Drop Down is used as a standard position.
Power
- Three AAA batteries allows to be not only compact but also light.
- When used with optional Li-Po 1 cell battery, weight become lighter and it can be changed from USB input.
SYSTEM: 2.4GHz FH5 4CH Transmitter: TX-491 Receiver: RX-493i
Other functions
- Movable Carrying Handle
- Quick Setup Wizard
- Safety Link
- Racing Mode Customized Menu
- Micro SD card-compatible
- Telemetry Switch
- Clock
- Circumstance Temperature Display
- CSV Output for LOG data
- CODE 10-compatible (Naming support)
- Simultaneous three telemetry data display
- Three AAA Batteries
- Li-Po 1 cell-compatible (USB change support)
- Large full dot LCD monitör
- Wight LED back light
- Full adjustable trigger
- Telemetry function
- Built-in antenna
- Multi Menu Selector
- ST/TH Tension Adjuster
- Dual Rate
- End Point Adjuster
- Anti-lock Brake
- Servo Speed
- Offset
- Trim/Sub trim
- Servo Reverse
- Curve (Exponential /Adjustable Rate Control)
- AUX1 (Movement type for 3CH. it's the same as MT-4S function.)
- AUX2 (Movement type for 4CH. it's the same as MT-4S function.)
- Fail safe (power/ battery)
- Timer (lap/ interval/ down)
- Lap Logger 20 model memory (when used with SD card, 250 models is available.)
- Model Name (12 letters)
- Model (Select/ Clear/ Copy)
- Direct Model Select
- Trim Type (Center/ parallel)
- Throttle Type (70:30 / 50:50)
- Response Mode Setting (NOR/SHR/SUR)
- Key Assign(SW/TRIM/DIAL/LEVER)
- AUX Type Setting
- Code AUX (w/ Naming function)
- STEP AUX (Step 1 - 100)
- POINT AUX (2 - 6 point)
- 4WS MIXING (Front/Rear/Normal(coordinate phase)/Reverse(opposite phase))
- MOA MIXING (FWD/4WD/RWD)
- AUX MIXING (ST MIXING/ TH MIXING)
- Buzzer(scale/volume)
- Transmitter Battery Alarm
- LCD Contrast
- Volume Adjustment
- Mechanical Rudder Angle
- Small Grip Pad
- Compatible Receivers:RX-491, RX-492, RX-493, RX-493i
- Telemetry-compatible
SSL (SANWA Synchronized Link) System
- When used with compatible receivers with Super Vortex Series, SV-Plus Series, PGS Servo Series, and SGS-02, etc. by Transmitter is available through SSL functions while driving.
- Since the setting can be done without the stop of the car, the detailed adjustment in accordance with Race conditions
- is available without interruption of Intervals and the change of machine conditions.
- [Response of Telemetry System]
- It is often said that telemetry systems reduce response speed. However, SANWA Original Data Processing and Algorithm Design make Telemetry possible without response speed reduction.
- Our Excellent Telemetry System has no response speed reduction.
- With our telemetry system, the precious race data will help the next race setting and driving.
- [Response Mode]
- Please do not use Analog Servo for SHR, SSR, or SUR mode.
- If an analog servo is used for SHR, SSR, or SUR mode, the servo will be broken and will not work.
- Digital servo (PGS, SRG, Digital ERG, SDX series) can be used both for NOR mode and SHR mode.
- SSR mode can be used by PGS and SRG series servo.
- SSR mode can be also used by SUPER VORTEX Gen 2 PRO, Gen2, STOCK, SUPER VORTEX ZERO, TYPE D, SPORT, HX-12 STOCK SPECIAL HV-01, and HV-02.
- SUR mode can be used only by PGS series servo.
- SUR mode can be also used by SUPER VORTEX Gen 2 PRO.
- *SUPER VORTEX Gen2 PRO needs a firmware update for SUR response mode.
- Please refer SUPER VORTEX Gen2 PRO page.
- http://sanwa-denshi.com/rc/car/speedcontroller/super_vortex_gen2_pro.html
- In SHR or SSR mode, BL-FORCE, BL-SPORT, F3300, SBL-02 and SBL-03CR do not work.
- Please use NOR mode for the above ESC.