Dimension: 174.3*206.9*106.9mm(6.86"*8.15"*4.21")
Battery Case Dimension: 114.4*35.4*32mm(4.5"*1.39"*1.26")
Antenna Length: 90mm(3.54")
Weight: 536g(18.9oz)
Channels:12 fully proportional channels, all 12 channels can be programmed
Output Frequency: 2.4GHz ISM band(2400MHz~2483.5MHz)
Spread Spectrum: FHSS 67 channels pseudo-random frequency hopping
Operating Systems:freeRTOS+LVGL GUI
Long-range Module: it fully supports ELRS, TBS Crossfire, and other mainstream long-range modules
Response Latency: 3ms, 4ms, 14ms can be selected
Channel Resolution:4096 with regular jitter of 0.25us
Modulation Mode: GFSK
Channel Band Width:400KHz
Channel Pacing: 1200KHz
Transmitter Power:<100mW(20dBm)
Adjacent Channel Rejection:>36dBm
Transmission Rate: 38kbps
Reception Sensitivity:-104dBm
PWM Output Range: 875-2125
Cycle: 15ms/per frame
Operating Voltage: 7.4-18.0V(8pcs AA battery, a 2S-4S LiPo or 18650 Lithium battery)
Type-C Port Specifications: Input Voltage: 5 V(T12D can also be powered by a computer or a mobile power bank via Type-C cable)
Input Current: 500mA
Output Voltage: 4.6V-5.0V
Output Current: Maximum 1A
Operating Current: 100mA(±10mA)@8.4VDC
Control Distance:① FHSS: 4000 meters in the air(Maximum range is tested in an unobstructed area free of interference)
② CRSF: Depends on the RX and TX of the long-range module
Adaptable Models: Helicopter, Fixed-wing, Glider, Multicopter, Car, Boat, Robot
Signal Output: PWM&SBUS&PPM&CRSF
Low Voltage Alarm: Low transmitter voltage, low receiver voltage, low model battery voltage, or low RSSI alarm can be customized
Storage Model Quantity: 50
Storage Subsidiary ID Models Quantity: 16
270° Servo:Supported (Enable the 270° servo function set in Receiver Setting → RF SETTING → PROTOCOL menu.)
Simulator Mode: Beyond traditional simulators like Phoenix, the T16D features built-in simulator support (requires a firmware upgrade to V1.7.1). With no external dongle needed, connect to your computer via a Type-C cable to seamlessly support open-source simulators such as TRYP FPV, AeroFly, Uncrashed, Liftoff, FPV LOGIC, and Velocidrone - compatible with macOS and Windows systems.
Trainer Function: Support
Screen: 2.8 inches, 16 colorful screens, 320*240 pixels
Compatible Receivers: R12F(Std), R16F, R16SM, R8EF, R8FM, R8SM, R8XM, R8FGH, R8FG, R7FG, R6FG, R6F, R4FGM, R4F
Operating Temperature: -30° to 85° C
Compatible Control Board Hardware Models: Ardupilot, pix4, beta, Arduino, and Raspberry Pi, can be connected with SBUS signal

R12F Specifications

Dimensions:35.6*25*13.6(1.4"*0.98"*0.54")
Weight: 11.8g (0.42”)
Antenna Length: 205mm (8.07”)
Channel: 12 channels
Operating Voltage: 3-12V
Operating Current: 37±3mA@5V
Signal Output: SBUS+CRSF+PWM
Output Frequency:2.4GHz ISM band(2400MHz~2483.5MHz)
Spread Spectrum: FHSS 67 channels pseudo-random frequency hopping
Channel Resolution: 4096 with regular jitter of 0.25us
Adaptable Models: Helicopter, Fixed-wing, Glider, Multicopter, Car, Boat, Robot
Control Distance: 4000 meters in the air(Maximum range is tested in an unobstructed area free of interference)
Upgrade Online: With a Type-C cable (for data transmission) connecting the R12F to the computer, the latest cutting-edge functions can be easily added without any extra devices.
Response Latency:  3ms, 4ms, 14ms can be selected
Simulator Function: R12F comes with a built-in PC Game Joystick communication program(requires a firmware upgrade to V1.7), so it supports the latest simulator by connecting to the computer directly via Type-C port, such as TRYP FPV, AeroFly, Uncrashed, liftoff, FPV LOGIC, Velocidrone (Black Sheep Simulator), and other open-source simulators. No additional power is needed for the receiver. It can be used on both Apple and Windows computers.
Operating Temperature: -30° to 85° C
Compatible transmitter: T16D, T12D, T8FB, T8S, RC8X, RC6GS V3, RC4GS V3, RC6GS V2, RC4GS V2, RC6GS, RC4GS