Built-in polarity protection
One danger that all electrical systems face is a reversed polarity from
the power source. This can be caused by a short circuit, or usually,
incidentally reversing the terminals.
The XR10 Justock is integrated using MOSFET. If the battery terminals
are connected in reverse, the MOSFET will be reverse-biased and will
not allow current to flow through the system.

Fan intelligent start and stop function
When the ESC temperature is low, the fan does not activate,
when the ESC temperature reaches the preset value,
the fan automatically turns on.

Freewheeling function turned-on,
the ESC temperature is lower,
the vehicle decelerates faster when the throttle input is off,
and it has better controllability around the corners.

Built-in capacitor module
The built-in capacitor module eliminates the need for external capacitors
and unwanted space.

RPM speed limit function
The ESC is able to support up to 6 different speed (RPM) selections to meet the
needs and demands of various competitions in the world. It can be programmed
through using the latest OTA Bluetooth module or the traditional 3in1 program box.

Zero timing competition design

The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted.
It is specifically built for zero timing races around the world.

Built-in BEC supporting
High-voltage steering gear,The ESC has a built-in BEC which can support a
maximum output current of up to 8A and the output
voltage at either 6V or 7.4V. This will ensure
constant power supplied to today’s high-torque
servos in the market.

User-friendly and convenient for set-up
The ease of having a dedicated programming port eliminates the trouble of
plugging and unplugging the cable to the receiver. In addition, the interface can
power additional fans to further dissipate heat. The user-friendly interface allows
for easy and convenient setup by simply connecting the 3in1 LCD programming
box or OTA Bluetooth module to the dedicated programming port.

Single programming and RESET design button
The ESC is designed with a single built-in SET button. Calibrating or doing a factory-reset can
be achieved by using this SET button. Simple and easy to use.

Support bi-directional motor movement
The ESC supports both CCW (counterclockwise) and CW (clockwise) motor
rotational directions for different usage on the market.

Support ESC firmware upgrade
Hobbywing engineers are constantly innovating and pushing
the limits of its products. Enjoy the latest functions by
upgrading to the latest firmware. Simply connect the ESC
using either the HW LINK App via the OTA Bluetooth module
or the USB LINK software through the computer.

Specifications

Scale 1/10th

Brushless

Sensored

NON-Waterproof

Cont./Peak Current: 60A/380A

Input Voltage 2S LiPo 

BEC Output 6V/7.4V @8A

Input Wires Black-14AWG-200mm*2

Output Wires Black-14AWG-200mm*3

Fan Size 25x25x10mm

Output Wires 5-7.4V

Input Connectors: Powered by BEC

• ESC Programing via

• SET Button on ESC

• LED Program Box

• LCD Program Box

• WiFi Module

• OTA Programmer

Firmware Upgrade: Supported

Size & Weight 

40.9x33.9x32.1mm

75.4g(w/Wires)

SL BL Motors / SD BL Motors

Vehicles 1/10thTouring Cars & Buggies for Racing

≥10.5T 3650 Motor