The Ezrun MAX10 G2S is a 1/10 Brushless ESC with the same power ratings and case as the MAX10 G2. It supports sensored and sensorless motors. In sensored operation, it delivers linear power across the speed range, from launch and slow technical sections to sustained full throttle and jumps.

The housing has an integrated heatsink. Compared with the MAX10 G2, the MAX10 G2S adds integrated Bluetooth, internal data logging, and an 8.4 V BEC setting for high-voltage servos.

Notes

• A 3S battery or larger is required for 7.4 V or 8.4 V at the BEC.
• Turbo timing and motor overheat protection only work with a supported Hobbywing motor, for example, the Ezrun 3652/3665 SD G3.
• The effective Bluetooth range is approx. 5 m by design.
• Optional accessories: LCD Program Box Pro (HW30502002), OTA Bluetooth Program Module (HW30850400).
• Highlights
• Bluetooth module integrated into the power switch for programming from a smartphone via the HW LINK app, without additional hardware
• Internal data logging of the last 10 minutes of runtime, with graphical review in the HW LINK app
• Turbo timing up to 32 degrees: up to approx. 25% higher maximum RPM with an Ezrun 3652/3665 G3 motor
• Three-step BEC: 6 V / 7.4 V / 8.4 V at 5 A in switch mode
• Frameless fan with side air discharge; remains off at low temperatures and starts at a preset threshold
• Waterproof sensor interface; dust- and water-proof to IP67
• Capacitor overheat protection; protection against low voltage, overheating and loss of signal
• Programming via Bluetooth app or LCD program box; firmware updates via the app

Specifications
Type    1/10 Brushless, sensored and sensorless
Current (Cont./Peak)    140 A / 880 A
Input Voltage    2–4S LiPo
BEC    6 V / 7.4 V / 8.4 V adjustable, 5 A continuous (switch mode)
Motor Types    Brushless motors with and without sensor
Motor Limit    2S LiPo: KV ≤ 6000 (3652 size motor) / 3S LiPo: KV ≤ 4000 (3665 size motor) / 4S LiPo: KV ≤ 2600 (4268 size motor)
Turbo Timing    up to 32 degrees
Fan    Yes, powered by the BEC
Programming    Bluetooth (HW LINK app) / LCD program box / OTA program module
Programming Port    Separate, 3-pin
Waterproof    Yes, to IP67
Input    XT60
Output    Gold bullet sockets
Dimensions    53 × 39.5 × 37.2 mm
Weight    125 g (incl. wires and connectors)
Application    1/10 Short Course Truck, Truck and Monster Truck