Dimension:  174.3*206.9*106.9mm(6.86"*8.15"*4.21")
Battery Case Dimension: 114.4*35.4*32mm(4.5"*1.39"*1.26")
Antenna Length: 90mm(3.54")
Weight: 558g(19.68oz)
Channels: 16 fully proportional channels, all 16 channels can be programmed
Output Frequency: 2.4GHz ISM band(2400MHz~2483.5MHz)
Spread Spectrum: FHSS 67 channels pseudo-random frequency hopping
Operating Systems freeRTOS+LVGL GUI
Long-range Module Script: LUA script
Long-range Module: it fully supports ELRS, TBS Crossfire, and other mainstream long-range modules to realize FPV aircraft full parameters adjusted by the T16D
Voice Broadcast:unique personalized and humanized voice broadcast customization
Response Latency: 3ms, 4ms, 14ms can be selected
Channel Resolution:4096 with regular jitter of 0.25us
Modulation Mode: GFSK
Channel Band Width: 400KHz
Channel Pacing: 1200KHz
Transmitter Power: <100mW(20dBm)
Adjacent Channel Rejection:>36dBm
Transmission Rate: 38kbps
Reception Sensitivity:-104dBm
PWM Output Range: 875-2125
Cycle: 15ms/per frame
Operating Voltage: 7.4-18.0V(8pcs AA battery, a 2S-4S LiPo or 18650 Lithium battery)
Type-C Port Specifications:Input Voltage: 5V(T16D can also be powered by a computer or a mobile power bank via Type-C cable)
Input Current: 500mA
Output Voltage: 4.6V-5.0V
Output Current: Maximum 1A
Operating Current: 100mA(±10mA)@8.4VDC
Control Distance: ① FHSS: 4000 meters in the air(Maximum range is tested in an unobstructed area free of interference)
② CRSF: Depends on the RX and TX of the long-range module
Adaptable Models: 
Helicopter, Fixed-wing, Glider, Multicopter, Car, Boat, Robot
Signal Output: PWM&SBUS&PPM&CRSF
Low Voltage Alarm: Low transmitter voltage, low receiver voltage, low model battery voltage, or low RSSI alarm can be customized
Storage Model Quantity:100
Storage Subsidiary ID Models Quantity: 16
270° Servo: Supported
(Enable the 270° servo function set in Receiver Setting → RF SETTING → PROTOCOL menu.)
Simulator Function:
Beyond traditional simulators like Phoenix, the T16D features built-in simulator support (requires a firmware upgrade to V1.7.1). With no external dongle needed, connect to your computer via a Type-C cable to seamlessly support open-source simulators such as TRYP FPV, AeroFly, Uncrashed, Liftoff, FPV LOGIC, and Velocidrone - compatible with macOS and Windows systems.
Trainer Function:
Support
Screen: 
2.8 inches, 16 colorful screens, 320*240 pixels
Compatible Receivers: 
R16F(Standard), R16SM, R12F, R8EF, R8FM, R8SM, R8XM, R8FGH, R8FG, R7FG, R6FG, R6F, R4FGM
Compatible Control Board Hardware Models: Ardupilot, pix4, beta, Arduino, and Raspberry Pi, can be connected with SBUS signal
Operating Temperature: -30° to 85° C